New Hunter out of Temecula

sportyg said:
Don't go by what other people say contact the MFG. give them the gun info and let them tell you. Sprig is correct however check the with the MFG just to be sure.
Click to expand...
Yup, give Browning a call, they are good people. I have spoken to them before and they were indeed helpful/knowledgeable.
 
sportyg said:
Don't go by what other people say contact the MFG. give them the gun info and let them tell you. Sprig is correct however check the with the MFG just to be sure.
Click to expand...

Just called them they said no steel . They said I could but the pattern wouldn’t be there. Also said the bismuth shells wouldn’t have a good pattern. They said lead only or change out the barrel or thread it


Sent from my iPhone using Tapatalk
 
freedom_fries91 said:
Just called them they said no steel . They said I could but the pattern wouldn’t be there. Also said the bismuth shells wouldn’t have a good pattern. They said lead only or change out the barrel or thread it


Sent from my iPhone using Tapatalk
Click to expand...

Bismuth should pattern just fine in a full choke...It was actually designed to be an alternate choice to steel in older guns.
 
ff-91,

Because your A5 has a full choke...It does have the capability of having choke tube system put in.

Installing choke tubes in older fixed choke barrels

Good morning, I have two older Remington barrels that I am contemplating having tubes installed. One is a standard frame 20 ga, plain barrel, 28" full choke which measures .710" so it can be done. The other is a vent rib 26" modified 12 ga. Am I correct in the fact I could shoot steel thru...
bushcraftusa.com
 
ilovesprig said:
Bismuth should pattern just fine in a full choke...It was actually designed to be an alternate choice to steel in older guns.
Click to expand...

I’ll buy a box and try it on paper thank you for all the help once again .
9b5cb423d964d2a9b2762f171e8f2543.jpg

This should work for coyote ?


Sent from my iPhone using Tapatalk
 
I think Larry ate this one, nose dive and full front flip. 17hr is what hit it on its back, pissed it off for sure, then ran into where we were comfortably seated all mad and hit it with the 12ga, lights out.

460B62F4-1169-4AD3-911D-574FC40E5A53.jpeg
 
freedom_fries91 said:
Just called them they said no steel . They said I could but the pattern wouldn’t be there. Also said the bismuth shells wouldn’t have a good pattern. They said lead only or change out the barrel or thread it


Sent from my iPhone using Tapatalk
Click to expand...
I have the same problem with a Winchester Model12 16ga full-fixed choke. I had to just buy a modern shotgun. some say you might be able to get the barrel threatened by a gunsmith depending on how thick is the barrel but honestly, it was not worth it.
 
Wildgame said:
I have the same problem with a Winchester Model12 16ga full-fixed choke. I had to just buy a modern shotgun. some say you might be able to get the barrel threatened by a gunsmith depending on how thick is the barrel but honestly, it was not worth it.
Click to expand...

Yep....Keep that Mod 12 16 gauge original..... :blush:

ps....Turner's has semi auto shotguns on sale for under 300 bucks.
 
You must log in or register to reply here.
Back
Top