Remington 1100 help

[Bowhunter_619]

Need some help with my Remington 1100 3" magnum. I cannot get the gun to cycle. I have replaced the gas piston kit, cleaned the gas port, and tried 3 dram equivalent ammo and it still will not cycle. Anyone have any ideas?

 

[NBK]

Is the gas ring (o ring) in the groove. Have you cleaned the gas ports in the barrel ring?

 

[Bowhunter_619]

When I took the barrel off it appeared to be in groove. Port has been cleaned.

 

[NBK]

Bring it by Fine Firearms for a look-see. Bring some ammo with you.

 

[Bowhunter_619]

I will bring it by on Monday. Headed to Vegas Friday till Sunday. Thanks.

 

[MasterBlaster66T]

Had same problem with mine, turns out it was just really dirty and needed a new oring. I broke it down and cleaned it really well, replaced the ring and oiled it and now it cycles fine. Browning.com has an awesome video series that will show you how on that exact gun.

 

[TaftHunter]

I use to have the same problem, ended up just selling the gun to my cousin

 

[Aeon]

The A400 kit can fix that problem right up

 

[Bowhunter_619]

Thanks for the tips Gents. I'm going to have Fine Firearms take a look at it on Monday.