Rifle question

  • Thread starter Deleted member 27310
  • Start date
Lee
The copper bullet has changed a lot of that.
I’ve been experimenting with my 7rem mag with 120 TTx’s and 162 ELDx’s. I’ve only compared them out to 500 yards so far. With the 120’s at 3320 FPS and the 162’s at 3015 FPS I can use the same dope out to 500 yards. 162’s hold a little better group but I wouldn’t be afraid to hunt deer with the 120’s at that distance.
The 120’s have a noticeable difference in recoil. If you are hand loading you could slow them down for even less recoil.
Daryl
I believe you. You are a outstanding guy.
Does it have a possibility of the geometry of the bullet being to short. Since it has to fit 30 caliber.
And the heavier bullet is longer.
I admit you guys are more informed about geometry and ballistics.
But I am taking note of your comments.
 
Thanx for the description longbow.

I got a .223 bolt gun for Varmints/Preds. Plus the idea was it could be my boys first centerfire rifle. He shoots it well, without any complaints. He shoots the AR15 well too.

From the extensive looking into it I've done, seems like a .223 should also be able to do Muleys just fine at the shorter distances I've been doing them at. Haven't tried it with .223 yet. Figure I want to get more kills under my belt before I try with a .223, that way if it doesn't go as planned I won't rage so bad about it.

I bought the .308 first because figured for sure it can handle anything I'd try which is up to Black Bear. Which is true. It would.

But I dunno... with all the fun I was having shooting the .223 at Ground Squirrels (it's even more fun with .17 HMR!), keep thinking .243 would probably be perfect sweet spot for me. And seems like they can do (SoCal-sized) Black Bears no problem from what I read. So that'd cover all my needs just fine.

I really like my Marlin 336BL .30-30 Lever-Action for the in-close action I'm faced with. And it seems to waste less meat. (Much less bloodshot meat around entry wound.) But it can feel a bit heavy after carrying it in for miles and miles.

The 168 gr Barnes TTSX's are crazy impressive in the .308...but.. they created for me like a 6" circle of bloodshot meat around the entry wound surface on my 1st deer. But.. it did drop to the ground right then and there though. There definitely is something to be said about that part of it.
 
Dog you need to workout those shoulders if recoil is a concern


Sent from my iPhone using Tapatalk
 
Hehe... you funny Revo. I'll betcha money... with as jacked-up as my shoulders are... and as inactive as they have been in my life of *now* (last five years, let's say)... that I could STILL probably push more weight than most mofos. I had weight-training all thru High-school and kept-on very consistently until about mid-40's when isht just started tearing on me whenever I'd try to push for higher weight. I can literally tear myself apart. And actually.... now that I think about... as a young man, I even fractured a clavicle one time when I fidgeted after taking a very heavy benchpress off the rack! My shoulders didn't feel right (probably a fold in my clothing or something) so I fidgeted and "rriiick!!"... something happened and I was all "Get it off! Get it off!!" so my spotter obliged.

And me pushing weight these days is hard to do too. After they did the sub-acromonial decompression on my dominant side to relieve the pressure into my bursa caused by a prior break to my clavicle making it now have a bend which caused the distal end of the clavicle to push down into the bursa constantly (something which would make it feel like I was getting stabbed with a javelin when trying to do military presses, for example)... to relieve that pressure they essentially ground-off the part of the clavicle that was pushing down into that bursa... as well as using that same rasp to rough-up the partial labral tear that brought me in for that surgery to begin with, on that side. Fixing the clavicle thing was just a bonus on that surgery.

So nowadays, as an example, I don't do bench on a straight bar anymore. Hurts too much. And... when doing dumbbell presses as a replacement... with all the looseness and play there is in that shoulder... it is no longer the tightness of all the ligaments and tendons which holds that shoulder joint in place. I mean... I does for normal daily stuff.. but when exerting... it is only thru the exertion of all those muscles all around the labrum that my shoulder is even held into place.


But like I said above... it's not the shoulder.. it's my collarbone on that side having a very "tented" shape to it from after a prior fracture it had from a MountainBike jump where I traversed a distance of 35 of my size 10 shoes placed heel-to-toe. I'd done it several times that day... but on that last attempt.... upon landing... the front inner tube on that particular bike (a Cross-Country full-suspension bike) popped from the repeated forces of that landing.. so the front-end knifed-under on me... so I tried to spot my landing and tuck-and-roll into it.. but there was just too much velocity involved and the hit that occurred onto the back of my shoulder was too fast, so the weak link is your clavicle. "Snap!" And it was a bear to heal too because of the way it 'naded into like 3 petals on the one side of the fracture. Was taking forever to heal, they eventually gave me a bone-growth stimulator which applies an electromagnetic field to the area to promote bone growth in your osteocytes.


Just for sh!ts and giggles Revo... I'd like for you to list at least 3 types of lifts that you feel I should be doing.. and then... I want you to list what are the max amounts of weight you personally can pull off in each of those lifts.

I mean... ya never know... you may surprise the heck out of me and be able to do some crazy amount, but I think this exercise would be fun in order to show you that (in my case) it has d!ck to do with shoulder strength. I say this because it sounds like your assumption is that I must be only able to do some pathetic amount or something. And honestly... I could use a challenge like this to motivate me right about now. So why the hell not.
 
this is going to be great Revo2811 VS. Larry , Friday night at the valley view casino sports arena, they will go head to head in a live heavy
weight lift-off, winner gets the coveted MachoMan Belt, get your tickets now @ Ticketmasters. Looking for 2 more contestants to open for the event
in the "100 lb. backpack pack obstacle course challenge". " Lets get ready to Rumbllllllllllllleeeeee!"
 
BUAAHAHAHAAAA....!!! NOICE!

But steveo0007, isn't it always "SUNDAY!...SUNDAY!!...SUNDAAAYYYYYY!!!" ? (Hehe)
 
@Larry modern brakes can tame any rifle. Moderately heavy gun with a brake and you are good to go. Just wear hearing protection.

Here is a 338L in rifle you can carry and the recoil is girl like. Think the gun is 9lbs.
 
I'm not a fan of anything that makes a gun louder.

I usually can't wear hearing protection in the field (though I may try one of those active hearing enhancers with protection circuitry at some point). Because I have to be listening, since I can't see the game until it's within my narrowed FOV I can see from where I'm tucked-in at, on the ground. Usually their footsteps clue me in to the fact that they are approaching, and based on that I get my gun at the ready.

Hearing their footsteps (and detecting the directionality of them) is a major part of it for me. And usually it goes down so quick I wouldn't have the time anyway to move-up the hearing protection.

Anyhoo, I'm *Ok* with the .308 Win. Especially since in a hunting scenario you're hardly shooting anyway. I'm just thinking that I want to try a .243 eventually since they are obviously more than capable. Like I said, I like the .30-30 Win... I find it pleasurable to shoot. It's just a lil on the heavy side for as much carrying as I have to do. So I'm thinking .243 Win should be best of both worlds. More energy on target than .30-30, less recoil, less of the weight.

Though I'm sure I'll still use that .30-30 from time-to-time because the way I have mine setup you can get on target real fast with that 1-3x20mm scope.
 
Richard,

Real good deal....We have the Axis in .243....Hasn't missed yet....I personally think it's the shooter, as much as the rifle....2 cents.
Steve, I agree but dont forget the ammo!! I bought a few rounds of cheap russian ammo and I couldnt make groups smaller than 3 inches at 100 yds. tried some remington and now I can put three bullets holes touching eachother at 100.
 
Last edited:
Steve, I agree but dont forget the ammo!! I bought a few rounds of cheap russian ammo and I couldnt make groups smaller than 3 inches at 100 yds. tried some remington and now I can put three bullets holes touching eachother at 100.

So true, Fabian.....We shoot Federal Fusion.....Although, this was the last year here in Cali........;)
 
The Barnes VOR-TX are good shooting ammo. And they wallop the be-jesus outta the game too. P.S. And for my personal 2 cents DO NOT waste your money with the FIOCHHI "Shooting Dynamics" cheaper grade ammo. Thought something was wrong with my rifle. Wasn't even on the paper! Switched right back to the nice copper rounds. BOOM right back where you expected them to be on the paper. NEver have I ever seen an ammo be THAT damn far off!
 
Rifle has made it home guys. I will be taking it to the range on Saturday. It is the older model Axis but has the accu trigger upgrade.

When I picked it up the guy behind counter wanted me to purchase a rifle lock before I walked out with it, that it was the law... good thing I research everything beforehand. I had just found out that if you fill out a Affidavit Stating Ownership of a Gun Safe or Lock Box you can just take it as is. Not sure when this was ok'd but the form had a rev. date of 2013.. I wonder how many times I spent $ on a darn lock when I could of used this form. Anywho good to know for future purchases.
 
Rifle has made it home guys. I will be taking it to the range on Saturday. It is the older model Axis but has the accu trigger upgrade.

When I picked it up the guy behind counter wanted me to purchase a rifle lock before I walked out with it, that it was the law... good thing I research everything beforehand. I had just found out that if you fill out a Affidavit Stating Ownership of a Gun Safe or Lock Box you can just take it as is. Not sure when this was ok'd but the form had a rev. date of 2013.. I wonder how many times I spent $ on a darn lock when I could of used this form. Anywho good to know for future purchases.
Congratulations brother.
Savage rifles are great.
 
Guy’s, any of you recognize this scope logo, it doesn’t have anything else on it. I’m thinking it might be some off brand scope? Debating if I should take it out for the Nikon buckmaster 4-12x50 I have.... or buy something new for it. What do you think? Thanks for the help. AAB37826-467D-437D-BBB3-30F38069AF50.jpeg9A96E0A2-CFFB-4A9D-85D1-EFD67A857810.jpeg
 

About us

  • SCHoutdoors was created in January of 2011 by a few people who love the outdoors. The main goal is still the same – bring people together who enjoy the outdoors and share their knowledge and experience.
    Outdoors in the West, Hunting gear reviews, Big Game, Small Game, Upland Game, Waterfowl, Varmint, Bow Hunting, long Range Rifles, Reloading, Taxidermy, Salt WaterFishing, Freshwater Fishing, Buy-Sell-Trade on Classifieds and Cooking/Recipes
    All things outdoors…come join us, learn, contribute and become part of the SCHoutdoors community.

Quick Navigation

User Menu